Edge Grain
- Boards ripped to 1-3/4″ strips, turned on edge, glued up
- Flattened and planed to exact thickness after glue-up
- 1-1/2″ through 4″
Hard Maple Butcher Block Countertop
96″ × 36″ × 1-3/4"
Edge Grain
Tung Oil
Built to spec.
Every board hand-selected. Every top cut, glued, and finished right here in Middle Tennessee. Yours, down to the 1/16 inch.
This Configuration
SpeciesHard Maple
StyleEdge Grain
Dimensions96″ × 36″
Thickness1-3/4"
FinishTung Oil
Price
$2,594.32
Configure & Order
As featured in
01
Construction Style
How the boards are arranged.
This top is built in Edge Grain. The arrangement decides how the grain reads across the surface.
Plank Style
- Wide boards face-glued for a continuous grain run
- Reads as a single slab, not a stack of staves
- Up to 42″ wide
End Grain
- Fibers stand vertical — the classic chopping surface
- Knife edges part the grain instead of cutting it
- Set blank sizes, tung oil or unfinished
02
Wood Species
Each one changes a room in a different way.
All four are hard and dense enough for butcher block. Choose on colour and grain — the finish drives durability far more than the species does.
Black Walnut
- Deep chocolate brown
- Playful grain, moderate variation
- Dings darken and enrich with age
White Oak
- Neutral light brown
- Heavy open grain
- The flooring industry's workhorse
Hard Maple
- Neutral blonde
- Tight closed grain
- What butcher blocks have always been
Mountain Cherry
- Strawberry blonde
- Tight closed grain
- Darker streaks through the figure
03
Finish
Protection with character.
The one decision that changes how the top lives. Cutting directly on the surface? Tung oil. Wet bar, prep sink, kids? Conversion varnish. This top ships in Tung Oil.
Tung Oil
- All natural, 100% food safe
- The one to pick if you cut on the top
- Easy mineral-oil upkeep
- Darkest look; ages best
Hardwax Oil
- Modified oil, tough water-resistant topcoat
- 100% VOC free
- Food safe once cured
- Spot repairable — sand lightly, recoat
Conversion Varnish
- Hard film, like automotive clear coat
- Our most protective option
- Zero maintenance
- Don't cut on it
Unfinished
- Raw wood, sanded to 220 grit
- For DIY finishing or matching an existing top
- We don't recommend leaving it bare
04
Thickness
Exact — never nominal.
When we say 1-3/4", the top measures 1-3/4". Every top is glued up oversize, then planed and cut to your exact dimensions — so the finished thickness is the number you ordered, not a nominal size.
1-1/2″
The most common perimeter thickness. Sits flush with standard cabinet runs.
2″
The most common island thickness. Reads as substantial from across a room.
Up to 4″
Bar tops, waterfall legs, chopping blocks. Priced by the quarter inch. For thicker tops, contact us.
05
Dimensions
Your size. To the 1/16 inch.
Any length from 24″ to 155″. Any width from 13″ to 72″. The 96″ × 36″ on this page is one configuration of a made-to-order product.
- Species
- Hard Maple
- Construction
- Edge Grain
- Finish
- Tung Oil
- Length
- 96″
- Width
- 36″
- Thickness
- 1-3/4"
06
Edge Profiles
One detail that changes everything.
Eight profiles, no upcharge. Routed after the top is dimensioned, before finishing.
CNC Precision
Cutouts, on our machines.
Send the appliance model number and placement dimensions. The opening is machined before finishing, so the cut edges are sealed.
Range Cutouts
Sink Cutouts
Something Stranger
Our Shop · Bell Buckle, TN
Built by hand. Hundreds of quality checks. One standard.
07
Lead Time & Shipping
Made to order means worth the wait.
Lumber is ordered and production scheduled per top. Nothing sits on a shelf waiting for you.
Shipping
Crated freight
Padding, then a plywood crate built to this top's exact dimensions. Curbside delivery.
Cancellation
2-week grace
Because lumber is bought and production planned per order, tops can't be cancelled or refunded after a two-week grace period from order placement.
Start to Finish
What happens after you order.
01
Tracker
Every order receives a custom tracker link with access to our shop drawings and the current status of your top.
02
Lumber
Boards are hand-selected for your top specifically. Colour and figure matched across the glue-up.
03
Build
Cut, glued, flattened, CNC machined, edged, sanded to 220 grit, and finished by hand.
04
Crate
Padding, then a plywood crate built around your top. Loaded and shipped curbside.
Live
Order Tracking
9stages
Every step of your build, tracked and dated in real time.
Know exactly where your order is.
Most custom shops go quiet after checkout. We built the opposite: the moment you order, you get a private tracker link — live production status, every stage dated, and an estimated finish date you can plan around. No account, no emails to chase. We haven't found another custom wood shop that offers anything close.
Order #221587
📅 Est. completion — July 4
48″ × 25″ × 1-1/2″ · Black Walnut · Tung Oil
Production progress — 50% complete
- 📋Order ReceivedMay 2
- 🌲Materials SourcedMay 13
- ⚙️Milling & DimensioningMay 27
- 🔧Glue-UpJun 9
- 🪚Shaping & RoutingJun 18
- 🔄SandingJun 24
- ✨Finishing / CoatingJun 29
- 📦Ready to ShipJul 2
- 🚚Shipped / DeliveredJul 4
A sample tracker view — every order gets its own
Real-time status
A live progress bar that moves as your top moves through the shop — updated at each stage, not once a week if you happen to ask.
Every stage, dated
Nine milestones from Order Received to Shipped, each timestamped. You always know what's done and what's next.
One link, no login
Bookmark it, or send it to your contractor or designer. No account to create, nothing to remember.
Most custom shops
- A confirmation email, then radio silence
- Email to ask where things stand, wait days for a reply
- “It ships when it's ready”
Walnut Wood Works
- A private tracker link the moment you order
- Live status, updated at every stage of the build
- An estimated finish date you can plan around
It's the level of access we'd want if we were the ones waiting on a custom top.
09
Care & Maintenance
Easier than you'd expect.
This top is finished in Tung Oil. Warm pans, hot food, and baking dishes are fine on any of them. Don't set a pan straight off the burner onto the wood.
Tung Oil
- Easy mineral-oil upkeep — apply, wait, wipe
- Scratches sand out and re-oil
- Cut directly on it
Hardwax Oil
- Soap and water
- Spot repairable — scuff and recoat
- Recoat every few years
Conversion Varnish
- Any household cleaner
- No maintenance schedule
- Use a cutting board
What Customers Say
The tops speak for themselves.
5.0
★★★★★
Verified Google reviews
J
Jen Porter Ross
Google review
★★★★★
Stunning! I ordered a large piece of butcher block for my kitchen island; 35\\\" x 74\\\", 2\\\" thick, black walnut, with the hardwax oil finish. The grain pattern is interesting and very beautiful, and the piece was put together with the thought and skill of a true artist. The counter is exactly what I wanted and I am so happy with everything about it.
D
Dennis Skaggs
Google review
★★★★★
Walnut Wood Works knocked it out of the park with my butcher block counters, don\\\'t even bother with anybody else!
J
James Williams
Google review
★★★★★
We replaced our granite kitchen counter with a laminated walnut one from Walnut Wood Works and it is amazing and very affordable.
E
Emily Bratten
Google review
★★★★★
Absolutely obsessed with our walnut washer/dryer topper, which completely elevates our laundry room.
M
Mac Matthews
Google review
★★★★★
From a walkthrough of the shop to consistent communication to a final product that is stunning (to put it mildly), this was a great experience with great people producing a great product.
Every review — even the 1-star
Reviews on a company's own site are cherry-picked; we know. So read them all on Google, unfiltered. Fair warning: there's one lonely 1-star — no comment, no name, no order we can trace. Everyone else gave five.
Read our Google reviews →
Questions we get every week
Butcher block, answered.
What is a butcher block countertop?
A butcher block countertop is a solid-hardwood work surface built from full-thickness boards glued together — not a veneer over plywood or particleboard. Every Walnut Wood Works top is made to order from a single species (black walnut, white oak, hard maple, or mountain cherry), flattened and finished by hand, in any size from 24″ to 155″ long.
Is this the only size available?
No. The 96″ × 36″ top on this page is one configuration of a made-to-order product. Set the length, width, thickness, species, finish, and edge profile in the builder above and the price recalculates instantly. Any length from 24″ to 155″, any width from 13″ to 72″.
Can I cut directly on the countertop?
It depends on the finish. If you want to cut on the top, choose an oil finish — tung oil on walnut, food-safe mineral oil on the lighter woods — all natural, food safe, and any scratch touches up. We don't recommend cutting directly on conversion varnish or hardwax oil.
How is a countertop this size shipped?
By freight carrier, curbside. Each top is encased in padding and then a solid plywood crate built to that top's exact dimensions. For extreme sizes the driver may need help unloading.
How do I install it?
Any competent contractor, cabinet maker, or installer can do it, and instructions ship in the box. Drill four to six oversized holes through the cabinet corner braces, set and centre the top, pre-drill from underneath about halfway through, then screw up through the cabinets so the screw enters the top roughly 1″. Use washers — wood moves with the seasons and the slotted holes let it.
Which species is most durable?
All four are hard and dense enough that durability shouldn't drive the decision. Choose on look and colour. The finish makes a far larger difference to how the top holds up than the species does.
Can I put a hot pan on it?
Warm pans, hot food, and baking dishes are fine. Don't set a pan straight off the burner onto the wood — it's wood, after all.
Ready to Build
This listing. Your exact size.
Your kitchen isn't a stock size. Neither is your countertop. Configure it, price it, and we'll build it in Bell Buckle.
Configure Your TopWalnut Wood Works builds custom solid hardwood butcher block countertops in Bell Buckle, Tennessee. This listing is a 96 inch by 36 inch Hard Maple butcher block countertop, 1-3/4" thick, Edge Grain construction, Tung Oil finish, priced at $2,594.32. Every countertop is made to order in any length from 24 to 155 inches and any width from 13 to 72 inches. Species: black walnut, white oak, hard maple, mountain cherry. Construction: edge grain, plank style, end grain. Finishes: tung oil, hardwax oil, conversion varnish, unfinished. Eight edge profiles at no charge. CNC sink and range cutouts available. Lead time 8-10 weeks. Shipped nationwide by crated freight.